It's easy to configure your Laview WiFi camera setup, however it might be annoying when you run into "Laview Camera Offline" problems.

• Make that the camera is in pairing mode, which is indicated by blinking LEDs, then start by plugging it into a power source.
• If you have never used Laview before, download it from the app store on your smartphone and register.
• To guarantee a solid signal during setup, position the camera close to your router.
• To add a device, launch the app, adhere to the on-screen directions, and then link the device to your WiFi network.
• Since Laview cameras sometimes don't support 5GHz bands, make sure your smartphone is linked to a 2.4GHz WiFi network.
• To troubleshoot if the Laview camera displays as offline, follow these procedures.
• Make sure the WiFi connection is strong enough; relocating the camera closer to the router could be necessary.
• Make sure that no firewalls or other restrictions are preventing the camera from connecting, and that the router's settings are suitable.
• Restart the Laview app, your network, and your camera.
• Factory Reset Laview NVR by holding down the reset button for ten seconds, then reconnect it via the setup procedure if the problem continues.
• Make sure the firmware for your camera and Laview app are also current.
• Avoid interference from other electrical equipment and position the camera in an area with consistent WiFi coverage for continuous connectivity.
• Your Laview camera should connect without any problems if you follow these procedures, which will stop future "Laview Camera Offline" problems and provide dependable home or workplace surveillance.

Get to know more about laview wifi camera setup by visiting our website.